Gpx TV Universal Remote Code & Setup Guide

GPX is one of the most popular TV brands out there. GPX TVs are usually available with remote control. However, if for some reason you mix up the GPX TV remote or it breaks, you can use a universal remote to program the TV.

Say you have a universal remote and you need a remote control code for the GPX TV. The following Gpx TV Universal Remote Codes are described in this post. The following are some remote control codes for GPX TVs. We have mentioned more than one code in the list for each device. If one code fails, try another.

Read More: Haier TV Universal Remote Codes & Program Instruction

You need to know how to program your universal remote to work with the GPX TV before you can use codes. GPX TV Guide for TV Universal Remote Control is also listed below.

Gpx TV Universal Remote Code

Do you need a Gpx TV Universal Remote Codes list? If yes, then check out the below table to find out the codes for the universal remote.

GPX TVs One for All Universal Remote Codes

If you want to know about the one for all universal remote codes for GPX TV, then you’re in the right place. Pick the needed code for your remote.

546	13977
3980	13980
3977	000

3 Digits Remote Control Codes for GPX

There are many Gpx TV Universal Remote Codes listed for the 3 Digit GPX remote control mentioned in the below section. Select the needed code, and if the code is not working, then choose another code by following the same process.

749	521
546	532
179	722
000	…..

4 Digit Remote Control Codes for GPX

We’ve mentioned the complete list of 4 Digit Gpx TV Universal Remote Codes in the following table. So, make sure to select the code which is required for the universal remote.

0096	5040
3980	1320
0944	3977
4586	4701

5 Digit Remote Control Codes for GPX

In the below table, we’ve clearly shown you the listing of 5 Digit Gpx TV Universal Remote Codes , there you can find your needed code with the brand names.

12693	13977
17048	10360
13196	12784
13980	10179

Gpx TV Remote Codes for Comcast

10093	13980
10179	13977

GPX TV codes for DirecTV remotes

12617	12784
10179	13402

GPX TV codes for Dish Network remotes

666	546
722	532
000	521
749	…..

GPX TV codes for GE remotes

5040

0944

GPX TV codes for One for All remotes

41343	3980
41336	3977
4586	……

GPX TV codes for Philips remotes

6331	4701
13463	6351
13365	6361
13561	6341
13669	6371
13767	17048

GPX TV codes for RCA remotes

10093	3402
13402	…..

GPX TV codes for Spectrum remotes

674	1319
2360	1335
256	1339
2784	1366

GPX TV codes for U-verse remotes

1320	13196
13980	1130
13977	1132
12693	12693
13977	1022
13980	……

GPX DVD Player Universal Remote 4 Digit Codes

0936	0944
2390	2114

GPX DVD Player Universal Remote 3 Digit Codes

098	826
882	704

GPX DVD Player Universal Remote 5 Digit Codes

22235	51304
20699	22164
54908	20769

How to program the GPX Universal Remote without the code method

Using the automatic search method, all universal remote control codes are scanned on the remote control. The codes are automatically scanned one by one to find the correct remote code that works with the remote to program the controller. Follow the instructions below:

Step – 1. Switch ON the smart device like  “television” you want to use with the universal remote control.

Step – 2. Switch on the remote control and press the device button (TV, DVD, CBL, and OK / SEL) for 3 seconds. The LED display light will indicate that the device is ready for programming.

Step – 3. Point the remote control towards the device and click the “CH +” and “CH-” buttons. The remote control will display an On / Off signal. .4.Press the V+ or V- button repeatedly until the device turns off.

Step –4 . Check the code by turning the On / Off button. The device must be turned ON. When turned ON, try changing the channel to make sure the remote has been programmed correctly.

Step –5 . Now tap on the “Device” button to save the code. The device LED will flashe twice to confirm the stored code.

How to program the GPX Universal Remote with the code search method

If you cannot find a suitable key code for the current device, you can set the universal remote control to the correct one in search mode. This is a manual mode code method that forces the remote control to turn into search mode.

Step 1. First “activate device”

Step 2. Now hold down the “Setup” button

Step 3. Enter the code “9-9-1” (three digits)

Step 4. Now hold down the power button on the remote and press the channel upwards until the unit turns off the TV.

The method mentioned above may be time taking, but it is very important to find your key code. After completion of the above steps, your remote control will work for all functions/devices.

With the above three methods, we can easily program a universal remote control device on our GPX TV.

How to find out If a GPX Remote is a Universal Remote?

The TV remote comes with the GPXs Tv that is a universal remote. This means you can use that remote to power another device besides GPX Tv.

The easy method to check your GPX remote is a universal remote. so, you have to check if the remote has 2 options: “SET and MODE”. If you find those options in the GPX remote, then it is a universal remote.

If you find any of the Gpx TV Universal Remote Codes that are not included in these, please let us know in the comment section we’ll help you.

To find out universal remote codes for various brands of your device then check out the categories

NOTE: in 3 Digit Gpx TV Universal Remote Codes, you can also add 0 in before the digit that works.

Summing Up

In the above write-up, we have mentioned the complete Gpx TV Universal Remote Codes list from which you can select the required code and program the GPX remote with multiple devices easily. We have also given the quick steps to connect the universal remote with various devices for your reference. If you have any further queries or requests, please write to us.