Universal Remotes & codes
Latest Sharp TV Universal Remote Codes & Program Guide -2023
Nowadays, people don’t have to get into trouble with several remote applications when watching TV with audio and video devices connected. Universal remote control has made the lives of humans easygoing while watching TV. Generally, this universal remote should be programmed into a TV to control many devices to control other devices such as cable boxes, CD Player, DVDs, or VCRs. This is The most significant advantage of a universal remote device that it can control electronic devices.
Read More: What Are the GE Universal Remote Codes and Program Setup Guide
If you get a Sharp Aquos TV Universal remote control and looking for a guide and Sharp TV Universal Remote Codes to program it, you landed on the right page. This guide will take you to the complete list of Sharp TV Universal Remote Codes along with the step-by-step process to program.
Universal Remote Programming procedures usually depend on the remote model in the same brand. Sharp TV Remote is not an exception to this rule, so when you want to perform high-speed remote programming, be sure to use the instructions for a specific model.
Full List of Sharp Aquos Universal Remote Codes for TV Programming
The full list of Sharp TV universal remote codes is provided below. So, choose the code as per your TV mode. If one of the Sharp Aquos TV Universal remote codes does not work, try another one from the list.
Sharp TV 3 -Digit Remote Codes
If you want to know Sharp TV Universal Remote Codes – 3 Digit codes, then check out the below table where you can find out your required codes as we’ve mentioned in the complete code list.
773 |
911 |
654 |
910 |
553 |
073 |
506 |
144 |
908 |
580 |
Here’s a list of 4 digit Sharp TV Universal Remote Codes for Sharp Aquos TV that helps you operate the Universal remote control.
4 Digit Sharp TV Remote Codes
We’ve discussed Sharp TV Universal Remote Codes 4 digits in the below section. Go through the table if you need the codes to program a universal remote. I am sure you’ll find the needed codes.
1012 | 2791 |
0281 | 1331 |
1462 | 1615 |
3531 | 1304 |
1419 | 1004 |
1222 | 5375 |
1240 | 1463 |
1144 | 1159 |
1588 | 1443 |
1815 | 1421 |
1207 | 1156 |
5353 | 5161 |
1110 | 1802 |
5130 | 2431 |
1140 | 1418 |
5387 | 1142 |
1122 | 2771 |
5151 | 1217 |
5374 | 1406 |
3081 | 1029 |
5130 | 2781 |
1610 | 1439 |
1027 | 1420 |
5 Digit Code for Sharp TV
There is a complete listing of Sharp TV Universal Remote Codes 5 digit in the below table. Try to find out the required Sharp TV Universal Remote Codes to program a universal remote with your Sharp Tv.
11610 |
10178 |
17725 |
11650 |
10837 |
14327 |
11144 |
14368 |
17823 |
17921 |
11331 |
11552 |
11993 |
11240 |
12272 |
Rca Universal Remote Code List for Sharp TV
1026 | 1423 |
1029 | 1357 |
1113 | 1122 |
1095 | 1372 |
1112 | 1443 |
1265 | 1171 |
1261 | 1447 |
1004 | 1196 |
1111 | 1173 |
1006 | 1012 |
1437 |
Philips Remote Codes for Sharp TV
0111 | 0913 |
0002 | 0813 |
0228 | 0202 |
0224 | 0603 |
0502 | 0907 |
0509 |
One for All Universal Remote Codes for Sharp TV
0095 | 0122 |
0079 | 0226 |
0004 | 0006 |
0020 | 0123 |
0266 | 0063 |
0009 |
Sharp TV Codes for GE Remote
0006 | 0095 |
0020 | 0009 |
0122 | 0226, |
0079 | 0266 |
0063 | 0004 |
0123 |
Magnavox Universal Remote Codes for Sharp Television
0028 | 0040 |
0034 | 0058 |
Manual & Automatic Process to Setup Sharp TV Universal Remote
Auto-Search Method
Every Sharp TV Universal Remote Code must go through a remote scan process when using automatic search techniques. It scans the codes one by one to find the correct remote code. The steps are listed below.
- Switch to smart devices that want to use the universal remote control, such as “TV.”
- Tap the remote “turn” for 3 seconds with the Device button (TV, DVD, CBL, OK / SEL). The program-ready status of the device is shown by an LED light.
- Point the remote on the device and click the [CH +] and [CH-] switches. Remote signals are on / off. Press the “Up” or “Bottom” key continuously until the device is closed.
- Press the “Power” button to check whether the code is working or not.
- Press the Device button to save the code. The leadership of the device to check the saved code will blink twice.
Programming Sharp Tv Universal Remote Without Codes
All the universal remote codes are ones gone through by the scanning process in the remote, In the auto search method. It just scans one code at a time to find the correct code for programming and controlling the remote. Follow the steps outlined below. Follow the below instructions
Step – 1. SWITCH ON your smart device TV
Step – 2. TURN ON the universal remote and for 3 seconds tap on the component button like TV, CBL, DVD, OK\SEL.
Step -3 When your device is ready for the program, then an LED flashlight indicates
Step -4. Hold down the remote pointing toward the device and press CH+ & CH- switches, then the remote shows signal off.
Step – 5. To verify the selected code click on the POWER key and the device will TURN ON.
When the device starts, try to check that the remote is working
properly by changing the channel and volume up or down.
Step – 6. In the end, click the DEVICE button to save the required code, and the code is stored for confirmation, LED light of the Device will blink twice.
How to Program Sharp Aquos Remote?
Click on the FUNCTION button continuously in the universal remote till the LED under the component is ready to program and press the FUNCTION and DISPLAY key at one time to enter the device code mode. The LED light inside the device will blink. By using the number keypad Enter the code 05.
How Can I Connect a One for All Remote to a Sharp TV?
STEP 1 Firstly, click on the MAGIC key on the remote.
STEP:2 To control, select your device
STEP:3 Lastly, press the digit of your brand & device on the remote (e.g6 for Samsung TV) when the device TURNS OFF release the key you’re pressing after that an LED will blink twice in the remote.
How do I Program a for all Remote to a Sharp TV?
- Press the device button like (TV, CABLE, VCR, etc) that you want to program, then release
- Hold down the SETUP button and then the red LED light will flash twice, then release
- Enter the three-digit code of your brand, after entering the code you receive two quick flashes.
Setup the Remote-Control App
1.“Download the “Android TV Remote Control app” from the Google Play store to your phone.
- with the Wi-fi network try to connect your phone and Android TV
- open the Android tv remote control app on your phone
- Hit the name of your Android Tv
- A PIN will show on your TV screen.
we hope you get a solution for your remote problem, we have provided all Sharp TV Universal Remote Codes along with programming methods, please share your feedback and recommendation for this post .it will help to improve this guide .
-
Universal Remotes & codes2 years ago
RCA Universal Remote Codes List & Quick Setup Programming Guide
-
Universal Remotes & codes2 years ago
Toshiba TV Universal Remote Setup Codes & Program Guide 2023
-
Universal Remotes & codes2 years ago
Program Guide: 4 Digit Universal Remote Codes for Samsung TV
-
Universal Remotes & codes2 years ago
How to Reset a Universal Remote Control Using Program Method
-
Universal Remotes & codes2 years ago
Insignia TV Universal Remote Codes & Setup Guide
-
Universal Remotes & codes2 years ago
Best Philips Universal Remote cl019 Codes & Program Guide
-
Universal Remotes & codes2 years ago
GE Universal Remote control Codes and Programming Guide
-
Universal Remotes & codes2 years ago
Programming Haier TV Universal Remote Codes & Guide