Easy Program Guide: Supersonic Universal Remote Code List 2023

Supersonic is one of the most popular TV brands out there. Usually new supersonic TVs are full of remote controls. However, if for some reason you mistake the remote control for a supersonic TV, you can program the TV with a universal remote control.

To program your supersonic television on a universal remote, you need Supersonic TV Universal Remote Control Codes for the supersonic television remote control. This post describes the following codes.

Supersonic has a number of universal remote control codes, which are listed here. We have mentioned more than one code in the list for each device. If one code doesn’t work, try another. The code usually consists of a four or five-digit number.

Supersonic TV Universal Remote Control Codes List

4-Digit Universal Remote Codes for Supersonic

On this page, you will get details on four-digit Supersonic Universal Remote Codes that work with your remote for programming the Supersonic device. Select the right code from the below list and try to link it with your Supersonic universal remote. If it links, you can enjoy the brand device otherwise; try for other code until it matches.

Read More: Insignia TV Universal Remote Codes

3595	1421
0096	0556
0455	5330
0241	0208
4701	0698
0944	……

Supersonic TV Remote Codes 5 Digit

15322	13877
11233	12104
11125	13894
13593	12424
11753	21354
13595	13154
13204	17048
14421	13135
22321	…….

Philips Universal Remote Codes For Supersonic TV

0096

…..

Supersonic TV codes for Spectrum remotes

2397	1753
3894	2104
3154	3595
3593	2784

Supersonic Universal Remote Codes for Samsung TV

Samsung TVs have special features and need a special remote to operate them. This is a one-stop solution for operating Samsung devices if you use a Supersonic universal remote. You have to match the remote with a key code that suits the brand of your device. The below-listed Supersonic Universal Remote Codes will easily program the remote for operating your Samsung TV.

2051	3131
0812	….

One-For-All Universal Remote Codes For Supersonic TV

0944

…..

Supersonic Universal Remote Control Codes for GE

The GE universal remote codes do support the Supersonic gadgets when linked with the right programming code. Why don’t you try the below-mentioned GE universal remote codes for controlling your Supersonic TV? Enter one key code and program the remote. If the remote does not respond, check with the other code from the same list of Supersonic Universal Remote Codes .

0944

…..

Supersonic TV Remote Codes Comcast

13204	13154
11531	13595
10178	12104
13894	…..

Supersonic TV codes for DirecTV remotes

13593	12104
13894	11753
13204	13877
12784	13595
13154	……

Supersonic TV codes for Dish Network remotes

3894	3593
1753	2104
3595	…..

Supersonic Universal Remote Codes for Vizio TV

0944

Supersonic makes televisions from 13.3inches to 40inches. Many televisions are supersonic brands for RVs. Many of these TVs are AC / DC compatible with RV use. 13.3-inch TV, 15.6-inch TV, 19-inch TV, 22-inch TV, and 24-inch TV compatible with AC / DC.

You also need to know how to program your universal remote to work with your supersonic TV before you can use codes. See the manual for programming a supersonic television with a universal remote below.

How to program the Supersonic Universal Remote without code method

Step – 1.Turn on the smart device as “television” you want to use with the universal remote control.

Step – 2.Turn on the remote control and touch the device button (TV, DVD, CBL and OK / SEL) for 3 seconds. The LED display light will indicate that the device is ready for programming.

Step – 3. Click the “CH +” and “CH-” buttons on the remote control while pointing it towards the device. An On/Off signal will be displayed on the remote control.

Step 4- .Press and hold the V+ or V- button until the device turns off.

Step – 5.By selecting the On/Off button, you may verify the code. The device must be turned on.

Step 6- .Now tap on the “Device” button to save the code. The device LED will flashe twice to confirm the saved code.

How to Setup the Supersonic Universal Remote with the manual method

Using the keycode method, we can easily program a universal remote control and it automatically identifies your equipment make and model.

Step 1.To begin, turn on the device

Step 2. On the “Universal Supersonic TV Remote Control,” press “TV.”

Step 3.Then, on the universal remote control, press and hold the “Setting” button until the “Flashlight” displays. (ie in “Training mode”).

Step 4. At last, enter the “key code” that you have collected in the given programming manual (operating instructions).

Step 5. Once you’ve done so, press and hold the “Power button” while “pointing the remote towards the TV.”

Step 6. When the screen is turned off, you can release the “Power” button.

That’s all there is to it; a universal remote control now controls your TV perfectly. If your device doesn’t respond, repeat the same steps with other Supersonic Universal Remote Codes from the same section of the reference table.

How to program the Supersonic Universal Remote with code search method

If you are unable to find an appropriate key code for the device, you can program the universal remote control to the correct one while in search mode. This is a method of manually programming the remote to enter search mode.

Step – 1. First “activate device”

Step 2. Now hold down the “Setup” button

Step 3. Enter the code “9-9-1” (three digits)

Step 4. Now hold down the power button on the remote and press the channel upwards until the unit turns off the TV.

The method mentioned above may be time taking, but it is very important to find your key code. After completion of the above steps, your remote control will work for all functions/devices.

With the above three methods we can easily program a universal remote control device on our Supersonic TV.

How to check if the supersonic remote is a universal remote

Some of the TV remotes that come with some supersonic TVs are universal remotes. This means you can use the remote control to power devices other than the supersonic TV. To check if your supersonic remote control is a universal remote control, activate the “Set” and “Mode” options. If so, it’s a universal remote control.

Conclusion

This article must have helped you to get the right Supersonic Universal Remote Codes for your brand equipment. Follow the programming steps correctly and use the perfect key code that matches the brand of the appliance. If you have any doubts further, do write us.