Vizio Soundbar Universal Remote Codes Programming Quick Guide

Do you need Vizio Soundbar Universal Remote Codes to program your Vizio soundbar devices with a universal remote? If so, you will find all of the necessary information right here. Along with the list of universal remote codes for the Vizio sound bar, you will get the programming instructions also.

Before discussing the steps to program Vizio Soundbar with universal remote control, firstly check out the list of Vizio Soundbar Universal Remote Codes to program remote.

Read More: Latest Westinghouse TV Remote Codes 4 Digit & Program Guide

List of Vizio Soundbar Universal Remote Codes

Vizio Sound Bar Universal Remote Codes are usually found in three, four, or five-digit numbers. You can find codes depending on brand types and names. You have to find the required Vizio Soundbar Remote Codes for your device to connect with. Also, be careful while using the key code. If the selected code does not work, go for another one from the list of Vizio Soundbar Universal Remote Codes.

Check the Vizio Sound Bar 5 Digit Remote Code

Vizio Soundbar Universal Remote Codes help you to program your smart device accurately. You can get many Vizio Soundbar Remote Codes 5 digit in the below list wherein you have to select the right one for your brand device. If one code does not work, try another one for your brand type.

Code
32454
31975
31517
1009
11144

Vizio Sound Bar 4 Digit Remote Setup Codes:

Vizio Sound Bar four-digit Universal Remote Codes work with the universal remote when properly programmed. For your branded device, these Vizio Soundbar Universal Remote Codes are available to program it with remote control. So, choose the right Vizio Soundbar Universal Remote Codes from the below list to program your smart device.

0660

0883

Vizio Sound Bar 3 Digit Remote Code

627	004
505	011
113	502

Xfinity Remote Code Vizio Sound Bar

11756

10178

10864

11758

10885

Latest Westinghouse TV Remote Codes 4 Digit & Program Guide

Vizio Sound Bar Codes for Cox Remote

The following is a complete list of the Vizio Soundbar Universal Remote Codes.

32454

Directv Remote Code for Vizio Sound Bar

Find your preferred Vizio Soundbar Universal Remote Codes.

32454 

Vizio Sound Bar Remote Code Time Warner

1230

Bose Universal Remote Codes for Vizio

10864	11758
0672	10885
11756

GE Universal Remote Codes Vizio Sound Bar

31517	1517
0883	0660

Vizio Sound Bar Rca Universal Remote Code

If you are looking for the Vizio Soundbar Universal Remote Codes, then don’t worry. Here, is a complete list of Vizio Soundbar Universal Remote Codes :

1207

1204

Vizio Sound Bar Remote Code Dish Network

2709

Blackweb Universal Remote Codes for Vizio Sound Bar

1783	0912
3145	0891
1292	—

Philips Universal Remote Codes for Vizio Sound Bar

if you are looking for Vizio Soundbar Universal Remote Codes, please have a look below:

0883	31517
0660	1517

How to Program Vizio Sound Bar Universal Remote without Codes

Usually, all the Vizio Soundbar Universal Remote Codes undergo programming in the remote with the help of the auto search method. At one time, it scans only one code to check out the right remote code. This code then works with your remote to program the control. Check out the instructions given below.

• First, turn on the device like “TV” where you will use the Universal Remote for operation.
• Switch on the remote and press the device button (CBL, DVD and TV) for three seconds. You can see the LED light flashing which indicates the appliance is ready to program.
• Place the remote pointing to the device and tap on the “CH+” and “CH-“ buttons. The Remote then will display the On/Off signals. Tap on the “Up” or “Down” keys till the device gets switched off.
• After that, click on the “Power” button to verify the code. The device will get switched on. Now try to change the channel to verify that the remote is programmed properly.
• Click on the “Device” option to save the code. The LED light of the appliance will flash twice for confirming the code storage.

Manual Method to Set Up Vizio Sound Bar Universal Remote

Step 1. To begin, switch on the Vizio sound bar device and connect it to the remote.

Step 2. Press the device button like the TV on the Vizio Sound Bar Universal Remote control.

Step 3. Press the Setup button on the remote. It will flash an LED. This light indicates that the Vizio Sound Bar universal remote has entered learning mode.

Step 4. Now, enter the key code that you have chosen from the Vizio Sound Bar remote codes list provided in the above section of the post.

Step 5. After entering the code, hold your Vizio universal remote pointing towards the TV and press the Power button. After the TV turns off, release the button.

Step 6. Now, your Vizio Sound Bar universal remote will work perfectly. If the device is not working with the remote, choose another remote code for Vizio Sound Bar from the list and follow the exact instructions.

Steps to Reset a Vizio Sound Bar

Follow the instructions below to reset a Vizio Sound Bar to factory default settings:

• First, you need to tap the Bluetooth and Volume Down (-) keys. Then hold it for five seconds. This will delete all the settings and preferences which you have set before.
• Talking about some models, including Vizio 5.1 Sound Bar, you need to tap and hold power for 10 seconds. Also, press the Volume Up and Down buttons for 10 seconds. This will take your Vizio Sound Bar to factory default mode.

How to Resolve a Vizio Sound Bar Remote

If your Vizio Sound Bar Remote stops working, don’t worry as this need a little bit of troubleshooting. Below you can find the solution to fix your Vizio Sound Bar Remote.

Vizio Sound Bar Remote Battery

If your Vizio Sound Bar Remote stops working, its remote battery may be dead. If it is dead, replace it with a Lithium button battery (CR2025) because Vizio Sound Bar Remote does not support AA or AAA batteries as other universal remotes do.

Remote Placement Issues

The most common issue with the Vizio Sound Bar Remote is the signal not reaching the IR sensor. This may be due to other devices and items blocking the Vizio Sound Bar to get the signal. Move the sound bar onto the floor or to a shelf and keep the remote pointing to the device. If the remote is not working then a device or item is blocking it in its usual place.

My Vizio Remote Doesn’t Work

There are many reasons due to which your Vizio remote does not work. It can be due to non-working device batteries and the TV itself. Go for some troubleshooting to make your Vizio remote work again.

Remote Battery Problems

Your Vizio remote may not be working due to a dead battery. Batteries may burn fast due to the continuous usage of remotes. Try to take out the batteries and put them back in. If still not working, the batteries are fully drained. Replace with a new set of compatible batteries and check again.

Blocked Sensor

Your Vizio smart device will not work if it does not get the proper signal to its IR sensor. The IR sensor is found on the bottom right or left side of the TV. Check if some objects are blocking the IR signals when you point the remote to the TV. Make sure that the IR signals work within a limited distance.

TV Issues

These kinds of problems arise if the TV is not functioning properly. Try to unplug the power cable at the back of the TV and also from the outlet. Then, plug it back in. Click the “Power” button on the remote to switch on the TV back. Now, try to change the channels using the remote. Still, the TV is not working; there may be an issue with your TV.

Conclusion

In this article, you learnt about programming Vizio Sound Bar Universal Remotes and codes. you came to know about various Vizio Soundbar Universal Remote Codes to program your brand device. Hope this article has helped you.

For more information on programming your brand device with a universal remote, do write us and we will help you with no doubt.