Have you bought a new Universal remote? Are you not sure how to program your universal remote? You are at the right place, in this article you will learn about all the Dynex Universal Remote Codes and methods by which you can use these codes to program Universal remote control. Don’t you know the remote control codes for the Dynex TV?

In the article, we are providing all types of universal remote codes for Dynex TV. Use these Dynex Universal Remote Codes to program your universal remote. These dynex tv codes are of different types like three, four, and five digits.

Read More: How to Program Sharp TV With Universal Remote Codes

Dynex Universal Remote Codes List

The following is a complete list of Dynex Universal Remote Codes. Pick which one you like.

Dynex tv codes for universal remote 5 digit

10096`	10463
11931	10180`
11963	10171
17627	18212
10028	10154

4 Digit Code list for Dynex TV

0490	1250
0783	2891
2184	1944
0463	0464
1171	1463

Dynex TV Remote Code 3 Digit

583	706
908	844
500	115
726	200
724	587
603	800
650	720
001	333
632	503
120	698
585	220
533	666
221	834
538	256

RCA Universal Remote Codes For Dynex TV

32596

12049

GE Universal Remote Codes For Dynex TV

0371	3141
3161	2891
6521	5311

Philips Universal Remote Codes Dynex

5311	11435
0115	13153
1718	0371
6521	3161
11631	3141
15260	2891

Xfinity Remote Codes for Dynex TV

11780	11463
12264	12049
11785	……

Dish Remote Codes for Dynex TV

10065	10463
13811	10096
13811	11963
12270	10171
12284	10005
11665	10178
13700	10236
17464	11864
19617	10028
10623	17342
10096	18212
10030	10180
17627	12270
13207	10154
11931	11314

Dynex TV Codes Directv Remote

12184	12049
11463	11810
11785	12288

Dynex TV Codes for Comcast Remote Controls

11785	11463
12049	12264
11780	…….

Dynex TV codes for Spectrum remotes

3 digit code	415 , 424 , 577 , 167 , 400 , 096 , 567
4 digit codes	1280 , 2049 , 1271 , 4061 , 4071 , 1785 , 4641 , 1182 , 0463
5 digit codes	12049 , 10463 , 11463

Dynex TV Remote Code for Att Uverse

1040	1507
12049	12184

Sony Remote Codes for Dynex TV

10154	10005
13811	10171
13207	10065
10623	17342
11864	13700
10096	17627
10096	10463
17464	10236
10028	12284
10178	12270
10180	10030
13811	12270
11931	19617
11963	11314
11665	18212

Onn Universal Remote Codes for Dynex TV

2351	1181
1171	0135
2461	…..

Dynex TV codes for Blackweb universal remote

1181	2461
0135	1171
2351	…..

Charter Remote Codes for Dynex TV

0463

……

Dynex TV Codes for Cox Remote

0463

……

Magnavox Universal Remote Codes for Dynex TV

1083	1053
1056	1018
1059	0007
1061	1047
1004	1057
1060	1059

Dynex Universal Remote Codes List

One for All URC-6690	0464
Comcast M1057	10463, 0463, 096
Rogers DCT3250	0463
Sony RM-VL600	8043
CableVision UR2-CBL-CV04	096
Dish Network VIP(508)	720
RCA RCU807	135
TiVo HD	0091
Motorola DRC800	0463
TiVo SERIES 3	091
Direct TV RC23	10463
Phillips	115
Dish Network VIP622	720
Shaw DCT3416	0463

The Dynex TV Can Be Set Up

1. Auto-Search method.
2. Manual method
3. Code search method

How to Program the Auto Search Function on a Dynex Universal Remote Control?

In the auto-search method, the remote’s scanning mechanism scans all of the universal remote codes stored in the remote.

It analyses each code one by one to get the right remote code for programming your remote control. Adhere to the following instructions:

Step-1 “Power on” the smart device you desire to operate with the universal remote control, such as a “TV.”

Step-2 To “power on” the remote control, press and hold the device button (DVD, TV, CBL, and OK/SEL) for about three seconds while holding the remote. The gadget’s LED light indicates that it is ready to be programmed.

Step-3 Aim the remote toward the device and push the remote’s “CH+” and “CH-” buttons. The remote control will indicate if the device is on or off. Incessantly press the “up” or “down” keys until the gadget shuts off.

Step-4 Verify the code by hitting the keyboard’s “power” key. The gadget should be operating at this point. If something begins to play, change the station to ensure that the remote is configured properly.

Step-5 From the drop-down menu, pick “device” to save the code. The device’s LED light will flash twice to indicate that the code has been updated correctly.

You may programme the Dynex Universal Remote using the Manual Method

We can program a universal remote control quickly and easily using the keycode, which also acts as an identification for the manufacturer and model of your equipment.

Step-1 The first step is to “Turn On The Device.”

Step-2 From the drop-down menu on your “Dynex universal remote,” select “TV.”

Step-3 Then, hold down the “Setup button” on the Universal Remote until the “Flash Light” appears on the screen (this indicates that the remote is in “Learning mode”).

Step- 4 Finally, enter the “Keycode” that you find throughout the programming tutorial’s reading (Instructions Booklet)

Step-5 Once you’ve finished the previous step, “point your remote control at the television” and “press and hold the power button.”

Step-6 To restart the screen after it has been turned off, press and hold the “Power Button” for a few seconds.

That’s all; your television should now operate flawlessly with the universal remote control; if not, repeat the process using a different Dynex Universal Remote Code from the same area of the reference table.

The Dynex Universal Remote Control: How to Program It Utilizing a Code Search Technique

Even if you were unable to discover the correct key code at the time, you may configure your universal remote to look for the correct code. This code, which is provided in the instructions, causes the remote to enter search mode.

Step-1 To begin, “Start your The Device.”

Step-2 Now hold down the “Setup” button for a few seconds.

Step-3 Push the Channel up button now while continuing to press the “Power Button” on the remote control until the device, in this example your television, “Turns Off.”

While the method detailed above may take a bit longer, locating your key code is critical. After following the instructions indicated above, your remote should be functioning for all in-room features. Using one of the three approaches stated above, we can easily program our Dynex TV Device Universal Remote.

Is Dynex a reputable television brand?

Dynex Produces High-Quality Products at Reasonable Prices. I’ve owned various Dynex devices (a wired router, a television, and so on), and each time I’ve been satisfied with their performance. Additionally, their LCD HDTVs are excellent.

How long will a Dynex television last?

While the displays themselves will survive a decade, the rest of the gear within will not. With careful care and maintenance, a decent brand should last around 5-8 years.

What is the best way to program a universal remote control without a code?

While pressing and keeping the Button and the control for the item to set up, tap and hold the Menu icon. When asked, release both buttons at the same time. When the LED light on your remote control illuminates and remains illuminated, you may remove the item’s button as well as the Power button. To program your remote, point it towards the thing that you wish to program it to work with.

Conclusion

The Universal Remote Codes listed above are advantageous for the Dynex TV and may be located in the list above. If any of the previously listed codes do not work properly on your remote control device, you must proceed to the next code on the list.

Any other Dynex tv remote codes not mentioned in the above list should be put in the comment section below. We appreciate your time in reading!

Vivitar universal remote has three-digit and four-digit universal remote codes and it is eight an one remote control.

If you do not know the code for your device, then look for the vivitar universal remote codes list in this guide so that you can easily program your device with universal remote instructions.

Three methods are mentioned below for vivitar universal remote setup. Try all three methods and finally chose the method to get your remote programmed with your device.

Vivitar Universal Remote Codes List

You’ve come to the right place if you’re looking for a complete list of universal remote codes.

In the table below, we have listed everything along with their brand names. To program your device, try to select the code that best suits your universal remote.

3847	1834
1938	3031
3475	1738
0053	5199

3475	0053
3847	5199
1738	1834
3031	1938

Vivitar Universal Remote Codes for Emerson TV

0181	0171
0038	0178
0019	1963
0179	0154
0180	0270

Vivitar Universal Remote Codes for Insignia TV

Insignia TV Remote Codes & Setup Guide

1326	2002
0171	1517
1963	1204

Vivitar Universal Remote Codes for Philips TV

Best Philips Remote cl019 Codes & Program Guide

0690	1483
1154	0054
1454	……

Vivitar Universal Remote Codes for Lg

Universal Remote Codes for Lg & Program Guide

1325	0829
1265	1993
1758	1423
0700	0442
0856	1178
0178	……

Vivitar Univearsal Remote Codes for Samsung

We’ve mentioned the complete vivitar universal remote codes list for Samsung in the following table. There are universal remote codes with brand names that help you to find your required codes that can easily program in the universal remote to work with your device.

0814	0702
0032	0019
0408	0427
0329	1312
1903	1575

Vivitar Universal Remote Codes for Sanyo TV

Here, you can find your vivitar universal remote codes list for Sanyo Tv, we’re here to help you to find your codes. In the below table you may have the complete list of universal remote codes you can search for. Now, look at the table below

1142	0146
0154	0159
0484	0799
0088	0107
0232	0893

Vivitar Universal Remote Code for Dynex TV

0049

…..

Vivitar Universal Remote Codes for Vizio

Vivitar Universal Remote Codes List

113	505
011	1064
1226	502
004	627

Vivitar Universal Remote Codes for Sony TV

Vivitar Universal Remote Codes List

1001	1177
1093	1036
1135	…..

How to Program Vivitar Universal Remote

How to Manually Program the Vivitar Universal Remote

Using the keycode makes your universal remote code programming simple. using the keycode method you can  easily identify your device model 

1. Firstly, Turn The Device On.
2. Next, Press the “TV” button on the “Vivitar universal remote.”
3. Press and hold down the “Set up key” of the Universal remote until it flashes light. This flashlight indicates learning mode.
4. Enter the keycode from the instructional booklet.
5. When done, “point your remote towards the TV” and “press and hold down the power” buttons.
6. Now release the Power button when the screen switches off.

Now your TV is ready to work perfectly with universal remote control. If your device is not working, then repeat all the steps with different codes from the same instructional booklet.

How to Setup Vivitar Universal Remote With Code Search

• First, “Turn the Device On.”
• Press and hold down the “Setup” button.
• Enter the three-digit code- 9-9-1.
• Hold the “Power button” on the remote and now press the Channel up until the device, the TV “Turns off.”

This method is time-consuming but finding your keycode is the foremost thing. After completing the process your remote is ready to perform all the functions.

How do I Program Vivitar Universal Remote Without Codes

Television is the best way for entertainment and there are many other devices like DVD player, Home Theatre, etc which we use in our home. To use that device, you need a universal remote. with the help of a single universal remote, you can handle multiple devices.

Mostly, to operate a universal remote you’re instructed to have a code for programming the remote right? If Yes, then you can also have the complete Vivitar Universal Remote Codes List in the following table along with that, we’re going to learn how to program Vivitar universal remote without codes. So, let’s get to the point.

Programming Vivitar Universal Remote Without Codes

In the following few steps, we’re going to discuss how to program Vivitar universal remote without codes. follow the instructions properly

STEP:1 To begin with, you need to SWITCH ON your device that will work with the universal remote.

STEP:2 After the device now TURN ON your remote, hold on to the component button such as TV, CBL, DVD, and OK\SEL for about 3 seconds, the LED light indicates in the device which means the device is ready to program.

STEP:3 Now, pointing the remote to the device, click on CH+ and CH- key then it shows off signals in the remote. Hold down the UP or DOWN key until the device will turn OFF.

STEP:4 Next, verify the code for this you need to click on the POWER button and the device will turn ON. When the device starts, you have to check whether your remote is programming correctly or not, try to change the channel, and volume ups, down in the remote.

STEP:5 In the end, you need to store the universal remote codes now, click on the DEVICE button, and the code is saved. For confirmation, an LED light will blink twice

Features of The Vivitar Universal Remote Control

This Universal remote control can control up to eight devices. It can work with most major brands of TV, Blu-Ray, DVD, VCR, Cable, Home Theatre, and Satellite….etc. It is a user-friendly design that is Ergonomic. The Batteries of this remote control are Powered by 2AAA batteries. This remote can replace the original remote

How do I Program my Vivitar Universal Remote Manually?

First, turn your device ON then press the TV button on your Vivitar universal remote and the flashlight will appear and enter the code which you find in the Vivitar Universal Remote Codes List . Now, point your remote to the TV and hold down the POWER button and the TV will turn OFF and you’re ready to control your TV with the universal remote.

NOTE: If the code doesn’t work with the universal remote then use another code with the same process as we’ve discussed above try it until you get the correct code.

Can I Program my Vivitar Universal Remote With Code Search?

 Yes, you can program the Vivitar universal remote with code search to find the correct one. When you can’t find the correct code, you can use the code search method.

let ‘s start the procedure, TURN ON the device and press and hold on the SETUP key, enter the three-digit code (9-9-1) now, hold down the POWER button in the remote, and then press the channels up until the device TURNS OFF. Now, the remote will work properly.

CONCLUSION

Universal remote always acts as the best remote for all devices. In the above methods, we’ve discussed everything on how to program Vivitar universal remote without codes and the vivitar universal remote codes list also. I hope this helps you and if you find any issues regarding universal remote then comment to us we’ll help you to solve your issues.

For receiving the digital broadcasts with a standard antenna, a digital converter box is required. Many companies manufacture these converter boxes. One of them is RCA that produces digital converter boxes like RCA DTA800.

You will need a remote control once you have connected the converter box to the antenna. With this remote control, you can operate various devices like TV.

If you have your RC digital converter box and are looking for a solution for how to program your remote using Rca Converter Box Remote Codes , we have got you covered here.

Read More : RCA Universal Remote Codes & Program Instruction

RCA DTA800 Converter Box Remote Codes List

The RCA digital converter box remote codes can be used to control your TV or any other devices after programming the RCA converter box with the correct RCA DTA800 Converter Box Remote Codes.

Below is the list of RCA universal remote control code for the converter box

List of RCA DTA800 Converter Box Remote Codes 

BRAND	CODE
Sylvania	049, 050, 054, 045, 055, 007, 064, 121,  005, 088
Sony	228, 247, 175, 251, 152, 303, 146, 003, 151, 308
Toshiba	121, 090, 184, 080, 195, 053, 198, 037,  052, 231
Universal	063, 039
Symphonic	139, 185, 027, 186
Sharp	087, 092, 085, 128, 071, 183, 021, 208, 298, 005, 274
Sanyo	124, 083, 198, 082, 268, 037, 274
Sansui	189
Samsung	177, 145, 195, 080, 202, 079, 213, 005, 013, 216
RCA	074, 073, 075, 072, 076, 005, 077, 001, 078, 000, 135
Philips	062, 054, 063, 050, 064, 049, 065, 007, 045, 181
Philips Magnavox	253, 258, 230, 270, 185, 273, 181, 279
Durabrand	186, 185, 189, 173, 274
Emerson	023, 022, 024, 021, 025, 020, 026,  005, 019, 027
Funai	139, 185, 036, 186
GE	053, 040, 063, 039, 122, 018, 123, 005, 135,  001, 149
Haier	242, 173
Zenith	176, 182, 115, 189, 114, 245, 113, 248, 002, 274
Hitachi	102, 101, 103, 100, 105, 044, 107, 043, 110, 005
Hisense	190
LG	260, 274, 221, 275
Magnavox	054, 050, 055, 049, 064, 045, 097,  005, 007, 098
Mitsubishi	183, 094, 197, 058, 217, 018, 260, 274,  005, 262
Proscan	163, 178, 135, 229,
Proview	241
Pilot	274, 177
Panasonic	187, 254, 179, 257, 125, 288, 045, 299, 040, 301
Prism	040, 179
Radio Shack	177, 178, 037, 186, 274, 001, 198
Simpson	007
Studio Experience	218
Supreme	175, 003
Princeton	211
Norcent	190
MTC	177, 195, 080, 260, 275, 005, 274
Nikko	177, 014, 182, 005, 274
Onwa	186
Orion	189, 029, 200
Pioneer	137, 068, 155, 067, 169, 066, 171, 274, 005, 199
NAD	155, 137, 184, 053, 274, 005, 052, 291
Proton	069, 205, 005, 274
Logik	002
JVC	048 , 047, 118, 046, 119, 044, 136, 180, 040, 157, 263
Harvard	186
GoldStar	117, 116, 177, 042, 260, 041, 274, 005, 275
Daewoo	016, 095, 015, 140, 005,  014, 182
Citizen	080, 037, 148, 014, 177, 007, 182, 005, 186
CTX	304
Bell & Howell	037, 002, 198
Akai	201, 195, 202, 177, 295, 003
Audiovox	188, 207, 186, 223, 182, 234
Benq	306, 204
Celebrity	175, 003
Contec/Cony	186
Broksonic	189, 186, 200
Commercial Solutions	178
Electrograph	193
Go Video	224
Insignia	244, 189, 309
Inteq	176
JC Penney	040, 039, 042, 018, 053, 007, 063, 001, 005, 079
KTV	132, 177, 051, 186
Admiral	128, 183, 002, 189
Belcor	274
Centurion	008
Contec	186
Carnivale	177
Brockwood	274
Amtron	186
Aiwa	290, 289
Concerto	274, 005
Dumont	245, 176, 274
Gateway	204, 193
Jensen	258, 260, 191, 274, 309, 005, 275
Apex	192, 184, 232, 172, 250, 053, 280
Changhong	192, 053
Cytron	309
Futuretech	186
Dell	181
Crosley	181
Carver	181
CXC	186
Dwin	212, 183, 214
Harman/Kardon	181
Janeil	129
Alleron	036
AOC	177, 143, 260, 130, 274, 005, 275
Celera	192, 053
Crown	186, 045
Advent	258, 260, 191, 275
Colortyme	009, 005, 274
Clarion	186
Bradford	186
America Action	186
Aiko	182, 014
Aventura	185
Albatron	218
Candle	129, 177, 005, 007, 274
Craig	186
ESA	202, 185
Fujitsu	036
Electrohome	017, 003, 005, 018, 274
Envision	177, 274, 005, 215
JCB	175, 003
Havermy	183
Hello Kitty	188
JBL	181, 045
Kloss Novabeam	129, 049, 050, 186
Kenwood	177, 005, 274
Kawasho	005, 003, 274
KLH	192, 053, 232
KEC	186
Konka	194
Fisher	198, 037
Daytron	274, 005
Denon	196
IMA	186
Hallmark	274, 005
Westinghouse	188, 226, 175, 235
Yamaha	274, 177, 005, 260, 275
White Westinghouse	189, 140, 207
Vidtech	274, 005, 260, 275
Vizio	235, 204
Viewsonic	222, 193, 235
Waycon	184
Viking	129
Vector Research	177
Vidikron	181
TMK	274, 005
Teknika	055, 181, 005, 014, 125, 002, 007, 036, 080, 182
Techview	219
Tatung	204
Syntax	240, 239
Supre-Macy	129
SSS	274, 186
Soundesign	186, 007, 005, 036, 274
Scott	200, 036, 020, 005, 029, 186, 274
Runco	206, 176, 177, 245
Pulsar	245, 176, 274
Optoma	225
Philco	181, 054, 049, 007, 005, 045, 050, 177, 260, 274,
Victor	136, 047, 180
V Inc.	235
Telefunken	295, 202
TNCi	176
TVS	189
Signature	002, 019
SVA	242
Technics	179, 040, 187
Starlite	186
Superscan	183
Sears	052, 139, 084, 037, 005, 001, 036, 047, 053, 135, 163
Squareview	185, 139
Realistic	198, 177, 001, 037, 186, 274
Scotch	274, 005
Quasar	187, 125, 051, 040, 070, 179, 254, 257
Techwood	179, 005, 274, 040
Sampo	177, 274, 193, 005,
Tandy	183, 128
Midland	179, 176, 135, 040, 163, 178, 245
Memorex	260, 197, 185, 037, 002, 005, 139, 189, 198, 274
Luxman	274, 005
Majestic	002
Maxent	193
MGA	274, 197, 058, 005, 018, 177, 260, 275
Marantz	230, 181, 057, 043, 005, 045, 177, 220, 274
Monivision	218
Net-TV	193
Multitech	186
Optonica	128, 071, 183
Penney	229, 184, 178, 001, 177, 179, 195, 274
NTC	182, 014
Motorola	183, 128
Olevia	240, 239
Optimus	198, 155, 137, 187, 199
Multivision	061
Matsushita	187
Minutz	039
Megatron	196, 005, 043, 274
LXI	163, 135, 045, 005, 001, 037, 052, 053, 147, 178
Loewe	045
NEC	274, 206, 009, 005, 177, 260, 275

How to Program RCA DTA800 Remote Using Codes for RCA Converter Box?

You have to follow a few quick steps to program your RCA remote control with a TV. Choose the appropriate code from the list of RCA converter box TV codes before that. Once you’ve chosen the code, continue by following the instructions below.

Step – 1. Firstly, remove the battery cover of the RCA remote and insert the new batteries. Now, switch on your television.

Step – 2. Press the “PRM” button on the left corner of the remote. A signal indicator light will turn on.

Step – 3. Now, enter the three-digit remote control code you selected from the RCA converter box codes. You can enter the code by pressing the number keys on the keypad of the RCA remote. After entering the code, press the”OK” button. Now, the indicator light will turn off.

Step – 4. Point the remote control towards your TV and press the volume buttons on it. If the volume changes, this means that your remote has been successfully programmed.

Step – 5. If the code you entered does not work, you can pick another one from the DTA800b1 remote codes list.

If the indicator signal remains lit even after blinking four times, this means that you might have used the incorrect code. You can pick another code from the list and follow the steps mentioned earlier again.

Troubleshooting Tips for RCA Digital Converter Box

1. If the signal is weak or the channel is not available

• Firstly, try to reposition the antenna.
• In case the signal is still weak, you might require a more powerful antenna to boost receiving of digital TV signals.
• We would recommend a smart antenna.

2. TV is not able to receive analog channels

• Switch on the digital converter box in pass-through mode. Also, be sure that all the cables are properly connected.

3. Smart antenna is connected newly and requires channel scan

• To access the settings, select 5 from the menu. Press 1 to select a channel after that.

4. No sound

• You have to make sure that the connections are properly made between the converter box and television.
• Also, make sure that the sound of the TV is not muted.

5. On the TV’s screen, there is no picture.

• Firstly make sure that the converter box is switched on.
• Check that the connections between the converter box and  TV are made correctly.
• Until the picture appears on TV, use different channels or video inputs.

6. Forgot password

• Go to the main menu and choose “Ratings”. Now, input the master password”3308.”
• Create a new password. The master password cannot be used to access programs for viewing.

7. The converter box turned off suddenly

• Auto Power Down Timer might be activated. Check it in the main menu. It is initially set to four hours.

Closure

A well-known manufacturer of converter boxes is RCA. After you have connected your converter box with the antenna, you have to connect the RCA remote control with your device like a TV.

The list of RCA DTA800 converter box remote codes and the steps to program them are described in the section above. We hope you don’t have any doubts about setting up RCA remote control using RCA digital converter box codes.