Comcast Universal Remote Codes & Programming Guide

There are so multiple Xfinity remote codes available. You have to figure out the most suitable one for Comcast Remote setup. If you have recently purchased the universal remote and are looking for how to program the Xfinity remote to your devices, you are at the right place.

In the following write-up, we have mentioned the complete list of Comcast universal remote codes. Also, along with that we have mentioned how to program the Comcast remote to TV or other devices in a few quick steps. So read on and find out all the information.

Before we tell you the procedure for Xfinity remote setup, have a look at the Comcast Remote codes list.

List of Xfinity TV Codes & Other Codes for Comcast Remote Setup

Comcast Universal Remote Codes

If you’re here to find out the code list for Comcast universal remote for your TVs, then you can find below the complete codes. In the below listing of codes, there are many Comcast Universal Remote Codes available select the required remote codes for your device. 

Comcast Universal Remote 5 Digit Codes

In the below section, you can find the 5-digit code for Comcast universal remote. There is a complete list of Comcast Universal Remote Codes to pick the needed code.

10434
10036
11291
10019
10036
10178
10812
10030
10000
11704

Comcast Universal Remote 4 Digit Codes

If you are looking 4 Digit Code for Comcast Universal Remote to program your remote .you’re at the right place. In the below table, you can find a complete list of Comcast Universal Remote Codes. select required codes.

0497

0056

0030

Comcast Xfinity Remote Control Codes For Dvd

18293

17283

12746

17384

10938

17847

12374

Comcast Universal Remote Codes List

Mitsubishi	0009 0254 0022 0005 0151 0051 0004. 0141 0180
Philips	0206 0207 0004 0062 0204 0189 0183 0184 0208 0205
Rca	0100 0102 0048 0054 0031 0004 0191 0005 0094 0107 0129 0009 0000
Samsung	0005 0085 0172 0007 0009 0012 0015 0105 0077 0004 0942 0076 0109 0358 0080
Sony	0002 0071 0128 0013 0380
Westinghouse	0114 0143
Zenith	0038 0111 0050 0078 0134. 0121 0059 0131 0009 0091 0138 0153 0064
Goldstar	0080 0156 0338 0012 0004 0009 0057 0005 0227
Sanyo	0110 0004 0049 0097 0268 0180 0012 0108
Panasonic	0437 0950 0148 0054 0003 0171 0170 0062 0374 0381 0070
Daewoo	0005 0138 0004 0009 0043 0130 0100 0140 0039 0252 0279 0444
Ge	0044 0054 0125 0015 0164 0004 0031 0107 0009 0000 0342 0003 0022 0052
Toshiba	0105 0049 0159 0178 0260 0358 0095 0170 0109 0120 0181 0394 0924
Sharp	0009 0226 0063 0020 0006 0095 0079 0123 0004 0266 0122
Vizio	0081
Hisense	0182 0073 0216
Ilo	1024 0198 1070 1023
Lg	0005 0227 0057 0080 0004 0050 0009 0338 0012 0156
Sanyo	10159 10154
Sharp	10165 10093
Panasonic	10250 10051
Lg	11265 10178
Toshiba	11156 10156
Vizio	11756 11758
Sony	11100 10000
Samsung	10060 10812
Proscan	0015 0000 0031 0107 0162 0163
Sansui	0310 0135
Sylvania	0009 0135 0456 0008 0068 0075 0062 0004 0189 0183 0227 0141 0161
Yamaha	0005 0004 0170 0004 0009
Universal –	0087 0052
Symphonic –	0227 0053 0189 0024 0456
Simpson –	0008
Radio Shack –	0227 0342 0042 0095 0004 0048 0049 0031 0053 0170 0009 0000 0012 0041
Nec	0009 0003 0181 0004 0005 0010 0095 0141
Optimus	0374 0170 0185 0381
Polaroid	0173 0182 0133
Realistic	0048 0049 0000 0227 0012 0041 0031 0004 0053 0170 0009 0042 0095
Signature	0001 0031 0000 0023
Emerson	0049 0051 0009 0044 0147 0039 0004 0135 0189 0053 0130 0227 0233
Hitachi	0004 0009 0001 0012 0088 0059 0142 0060 0072 0091 0061 0137 0139 0141
Insignia	0116 0167 0103 0189 0456 0029 0217 0135 0133
Fisher	0268 0180 0049 0110 0012
Dell	0028 0209 0132
Norcent	0043 0216 0056
Trutech	1029
Orion	0135 0121 0035
Pulsar	0004 0121
Samtron	0105
Dynasty	0042
Funai	0053 0227 0051 0189 0456 0042
Majestic	0000 0031 0001
Marantz	0004 0062 0181 0009
Supremacy	0174
Inteq	0121
Magnavox	0183 0226 0004 0009 0062 0456 0068 0075 0141 0288 0008
Sampo	0004 0009 0124 0046 0175 0012
Tmk	0012 0095 0004 0009 0117
Integra	0181
Kec	0042
Memorex	0135 0031 0009 0049 0004 0051 0310 0001 0000 0268
Kaypani	0175
Ima	0053
Medion	0198 0213 0158
Magnasonic	0051
Lasonic	0948 0210
Digistar	0118 0116 1019 0165 0167
Haier	0217 0081 0216 0157
Jvc	0197 0069 0065 0067 0060 0026 0012 0141 0247 0923
Konka	0016 0047 0412 0413 0053 0011 0066 0103 0029
Megatron	0009 0004 0059
Telerent	0000 0031 0001
Soundesign	0009 0051 0004 0053 0008 0042
Motorola	0003 0020
Net Tv	0124 0046
Vidtech	0005 0004 0009
Oncommand	0201
Tatung	0198 0081 0003
Philco	0005 0009 0003 0008 0062 0004 0183 0068 0075 0141
Quasar	0054 0170 0171 0148 0062 0003 0070 0374 0381
Superscan	0079 0112 0456
Syntax	1027
Portland	0058 0138 0004 0005 0009 0130
Nad	0109 0004 0009 0185
Technics	0054
Nikko	0009 0004 0058
Olevia	1027
Pioneer	0072 0004 0090 0179 0185 0181 0009
Infinity	0288 0062
Telecaption	0117
Lxi	0107 0109 0031 0004 0000 0227 0009 0049 0062 0015
Supersonic	0944
Kenwood	0009 0004
Tevion	0198
Initial	1070
Supreme	0002

Steps to Program Sanyo Soundbar Universal Remote Control Codes

How do I program my Comcast universal remote without codes

It becomes easier to control your TV or another device with a  universal remote. To operate your device with the universal remote you need a code for verification and in today’s article, we can learn how to connect your TV with the universal remote without the use of any codes.

With my experience, I can share how I program my Comcast universal remote without codes. If you want to know how to program, then make sure to read the following complete steps and process that I’ve mentioned below.

In this article, you can also find your code to control your universal remote with the device. I will be mentioning the code in the given above section. check those Comcast Universal Remote Codes and pick one code that is suitable for your device there are many codes available for you to control universal remote. To know in detail let’s walk into the article.

Step to Program Comcast Universal Remote Without Codes

For programming Comcast universal remote without any code, we need to use the auto search method. In the auto searched method, there is a scanning process method in the remote which means all the universal remote codes are going through to check by scanning to verify the correct code. It scans only one code at a time and finds the right codes to program the remote with your device.

To program the Comcast device you need to follow the 5 steps given below. 

Step :1 Make sure to SWITCH ON the devices like TV, or DVD that you want to control with the universal remote.

Step:2 Now, TURN ON the universal remote and for 3 seconds click on the device button (TV, OK\SEL, DVD, CBL), and then the LED light will indicate which shows that the device is ready to program. 

Step :3 Hold the remote towards the device to click on CH- & CH+ buttons and the remote will show ON\OFF signals. 

Try to press the UP or DOWN key continuously till the device turns OFF.

Step :4 Next to verify the code click on the “power” button and the device TURNS ON.

When it starts, make sure to change the channel and volume with the remote to verify the universal remote is programmed correctly.
Step :5 In the last step, To save the code you need to tap on the “DEVICE” button. When the code is stored the LED light of the device will blink (twice).

How to Program Comcast Remote Using Auto-Search Method

To learn how to program Comcast remote to TV using auto search method, follow the given steps. In the auto search method for Comcast remote setup, all the codes are gone through scanning one by one unless the correct code is found. Follow these quick steps for Xfinity Remote TV setup.

Step – 1. Firstly, make sure to turn on your device and your universal remote has working batteries.

Step – 2. Now, turn on the remote. Press and hold the component button corresponding to your device for Xfinity remote setup. If you want to program Comcast remote to TV, press and hold the TV button.

Step – 3. An LED light will turn on showing that the device is ready to be programmed.

Step – 4. Hold the remote pointing towards your TV. Now, for Xfinity Remote TV setup, click on the “CH+” OR “CH-” buttons. The universal remote control will give the on/off signals. Keep pressing the down and up keys until the device turns off.

Step – 5. After that, verify the Comcast code by clicking the power key.  If the device turns on, this means that Comcast remote setup is successful.  Try to change the channels and check if the remote is working properly.

Step – 6. Finally, click on the device button. Here, an LED light will blink twice to confirm the successful programming.

How to Program Comcast Remote to TV Using Manual Method

For Xfinity remote setup, you have to select the appropriate code from the Comcast Universal Remote codes list we have provided above. After that, follow the given steps.

Step – 1. Switch on the device you want to program with Comcast universal remote.

Step – 2. On the remote, press the TV button for the Xfinity Remote TV setup.

Step – 3. Now, hold down the remote’s setup button for a few seconds. Keep holding it until the flash turns on.

Step – 4. After that, from the list of Xfinity TV codes given above, choose the appropriate code for your device and enter it.

Step – 5. Once you are done, point the remote towards the TV. Now, hold down the power button until the screen turns off.

Step – 6. Now, your device will work properly. In case, the device does not work with a universal remote, try the Xfinity Remote setup with some other code from the Comcast Universal Remote codes list.

Xfinity Remote Not Working – Possible Reasons

In case your Xfinity remote is not working, there must be some possible reasons for this.  Let us check the reasons along with the ways to solve the issue.

1. Remote Battery –  It might be possible that the battery of your Comcast universal remote is bad. Because with bad batteries, the remote control’s functioning is affected. So, check the battery box of your remote if the batteries are fixed properly. Furthermore, make sure the batteries are not wet.

2. Obstructing Object – Another reason for Xfinity remote not working is the hindrance. There might be some obstructing object coming in between the remote and device. Make sure that you remove all the objects and hold your remote control close to the device.

3.  Incorrect Code – One reason for your remote not working properly is that you are using the wrong code. Above we have listed the complete list of Comcast Universal Remote codes and also we have mentioned how to program Xfinity remote. So choose some other code from the list and follow the steps.

Summing Up

Universal remotes are the best solution to avoid the usage of different remote controls for different devices. In the above write up we have mentioned the how to program Comcast remote using some simple steps. Also, for the Xfinity remote setup, we have given the complete list of Comcast Universal Remote Codes. We have also explained some possible reasons for Xfinity remote not working along with the ways to fix it.