Rca Converter Box Remote Codes and Program Instruction

For receiving the digital broadcasts with a standard antenna, a digital converter box is required. Many companies manufacture these converter boxes. One of them is RCA that produces digital converter boxes like RCA DTA800.

You will need a remote control once you have connected the converter box to the antenna. With this remote control, you can operate various devices like TV.

If you have your RC digital converter box and are looking for a solution for how to program your remote using Rca Converter Box Remote Codes , we have got you covered here.

Read More : RCA Universal Remote Codes & Program Instruction

RCA DTA800 Converter Box Remote Codes List

The RCA digital converter box remote codes can be used to control your TV or any other devices after programming the RCA converter box with the correct RCA DTA800 Converter Box Remote Codes.

Below is the list of RCA universal remote control code for the converter box

List of RCA DTA800 Converter Box Remote Codes 

How to Program RCA DTA800 Remote Using Codes for RCA Converter Box?

You have to follow a few quick steps to program your RCA remote control with a TV. Choose the appropriate code from the list of RCA converter box TV codes before that. Once you’ve chosen the code, continue by following the instructions below.

Step – 1. Firstly, remove the battery cover of the RCA remote and insert the new batteries. Now, switch on your television.

Step – 2. Press the “PRM” button on the left corner of the remote. A signal indicator light will turn on.

Step – 3. Now, enter the three-digit remote control code you selected from the RCA converter box codes. You can enter the code by pressing the number keys on the keypad of the RCA remote. After entering the code, press the”OK” button. Now, the indicator light will turn off.

Step – 4. Point the remote control towards your TV and press the volume buttons on it. If the volume changes, this means that your remote has been successfully programmed.

Step – 5. If the code you entered does not work, you can pick another one from the DTA800b1 remote codes list.

If the indicator signal remains lit even after blinking four times, this means that you might have used the incorrect code. You can pick another code from the list and follow the steps mentioned earlier again.

Troubleshooting Tips for RCA Digital Converter Box

1. If the signal is weak or the channel is not available

• Firstly, try to reposition the antenna.
• In case the signal is still weak, you might require a more powerful antenna to boost receiving of digital TV signals.
• We would recommend a smart antenna.

2. TV is not able to receive analog channels

• Switch on the digital converter box in pass-through mode. Also, be sure that all the cables are properly connected.

3. Smart antenna is connected newly and requires channel scan

• To access the settings, select 5 from the menu. Press 1 to select a channel after that.

4. No sound

• You have to make sure that the connections are properly made between the converter box and television.
• Also, make sure that the sound of the TV is not muted.

5. On the TV’s screen, there is no picture.

• Firstly make sure that the converter box is switched on.
• Check that the connections between the converter box and  TV are made correctly.
• Until the picture appears on TV, use different channels or video inputs.

6. Forgot password

• Go to the main menu and choose “Ratings”. Now, input the master password”3308.”
• Create a new password. The master password cannot be used to access programs for viewing.

7. The converter box turned off suddenly

• Auto Power Down Timer might be activated. Check it in the main menu. It is initially set to four hours.

Closure

A well-known manufacturer of converter boxes is RCA. After you have connected your converter box with the antenna, you have to connect the RCA remote control with your device like a TV.

The list of RCA DTA800 converter box remote codes and the steps to program them are described in the section above. We hope you don’t have any doubts about setting up RCA remote control using RCA digital converter box codes.