Are you an entertainment lover and finding some simple way to control all your home electronic devices, then here is the right solution. Buy a universal remote control that can operate all your entertainment devices with just a single remote.
But for programming this universal remote, you have to add a code that will connect your brand device with the universal remote. In this article, we have provided the universal remote code list for all brands. You have to insert the correct code while programming the device with the universal remote.
The codes given below are the four-digit codes and you have to search for the compatible code. From the given list of codes, you need to choose a code that will match the device model.
After finding the right code, follow the programming steps. When programmed correctly, the universal remote can control all the functions of your device. With a single universal remote, you can handle all your home entertainment devices at one time.
So what are you waiting for? Just go through the below list of codes and find the correct corresponding code for your device brand to get seamless integration with your universal remote control.
Universal Remote Code List for Different Device Brands
In this guide, you will come across the four-digit codes for various brands that will surely connect your device with the universal remote. First of all, check the model of your device and get the code for the same model from the list of remote codes.
After getting the right code, enter it using the remote’s keypad and perform the programming of your device.
Westinghouse Universal Remote Codes
Do you want to be able to program Westinghouse television codes into your preferred universal remote control? The Westinghouse universal remote control codes can assist you in programming your preferred universal remote control to your television set. In this article, I’ll go through the 3digit, 4digit, and 5digit codes for Westinghouse television sets.
The following is a comprehensive list of the Westinghouse Universal Remote Codes
0027
0478
3241
0912
0916
0002
Vivitar Universal Remote Codes
As is customary when programming a gadget, we must be familiar with the Vivitar universal remote codes. Here is a table that contains the codes for many different types of universal remotes, so that you can quickly control your gadget.
Vivitar Universal Remote Codesare shown in the next section as a thorough list.
0053
3031
1938
3475
1738
5199
1834
3847
TCL Universal Remote Codes
To make it easier for you to configure a TCL Technology device at home or anywhere else, we will now supply TCL Universal remote codes. You can also verify the Tcl Roku tv universal remote code here on this page.
TCL Universal Remote Codes are listed in detail in the next section.
5961
1421
2011
3431
6171
1691
2301
0091
2061
5771
3571
6031
2851
2111
4921
1851
2891
3421
Toshiba Universal Remote Codes
There are additional codes for Philips, Vivitar, and Magnavox accessible in the following list of Toshiba tv remote codes. You may also discover 4-digit Toshiba universal remote codes inside the following list of Toshiba tv remote codes.
Toshiba Universal Remote Codes are given in the following part to serve as a thorough reference.
0141
0394
0260
0109
0095
0012
0049
0181
0159
0095
0358
0178
0170
0117
0120
0924
0105
Sanyo Universal Remote Codes
We propose the universal remote codes for Sanyo televisions since they are compatible with Sanyo systems in both the home and the business. You’ll also find numerous helpful techniques and codes in this site, such as 3 digit or 4 digit Sanyo universal remote codes, that will allow you to switch between different functions on your television.
Also available are the GE and RCA universal remote codes for Sanyo televisions, as well as codes for other brands such as Philips, Magnavox, and Sony televisions.
Sanyo Universal Remote Codesare provided in the following section for your convenience as a comprehensive reference.
12264
11142
10799
12049
11480
11785
11362
0036
10735
SHARP TV Universal Remote Codes
Trying to figure out what SHARP TV universal remote codes to use? This article contains all of the codes for remote controls with three, four, or five digits. Sharp remote controllers may be used to operate other devices, eliminating the need for additional remote controls.
Check out the complete list of SHARP TV Universal Remote Codes
004
014
0009
0165
2166
2096
11774
107311
Samsung Universal Remote Codes
All of the Samsung TV remote codes may be found in the following list: Every universal remote that requires a 3, 4, or 5 digit code may make use of these codes, and it is a very simple procedure to programme these codes into your Samsung device. It is merely a question of providing the remote control codes for the Samsung universal television.
Check out the complete list mentioned below
667
077
036
064
004
0105
0030
0077
RCA Universal Remote Codes List
If you’re using numerous remote controllers, you won’t be able to enjoy the screen. With this RCA universal remote control, you may control a variety of devices at the same time, including televisions.
In addition, there is a large range of models available, and depending on which one you choose, it will be necessary to program it with the RCA universal remote codes. In this list, you’ll completely configure your remote with your device.
A complete list of RCA Universal Remote Codes List
0022
0094
0031
0187
0129
0003
0015
0179
0163
0048
0096
0000
0188
0102
0191
0107
0342
0009
0054
0125
0113
0005
0004
0100
0162
Roku TV Universal Remote Codes
Make use of the Roku universal remote codes to programme your remote to work with a variety of devices. You will need to setup your remote control to work with the Roku system if you use them. Simply follow the procedures that we have outlined below the list of codes to complete the process.
With a Philips universal remote, you can control nearly any device (TV, DVD player, Blu-ray player, or cable box, to name a few examples). This article will explain the process of setting up a Philips universal remote code system. Using the table below, choose the brand name you want to use, and then copy and paste the code that corresponds to that brand.
List of Philips Universal Remote Codes
0205
0200
0141
0184
0189
0204
0456
0075
0004
0008
0068
0086
0288
0183
0062
0003
0207
0199
0208
0087
Panasonic Universal Remote Codes
Do you have any Panasonic smart devices in your house, such as televisions? Do you have a working knowledge of how to program a Panasonic remote? As a result, you will discover in the following list all Panasonic universal remote codes that will allow you to setup your remote to work with the device.
List of Panasonic Universal Remote Codes
148
187
5010
5033
0051
0951
5201
5201
20077
21035
Onn Universal Remote Codes
For each device, I’ve included various codes in the list. If the first code does not work, try another. The code is commonly a four-digit number, as seen below.
5057
5053
5028
5130
5214
5090
5022
5095
5027
5115
One for All Universal Remote Codes
One For All remote controls are more compatible with practically every brand of television, cable, DVD, Blu-ray, media players, game consoles, and audio devices than any other remote control on the market today.
Before you use this, consider the following: You’ll need one remote code for all of your devices if you want to have seamless control over all of them. So, have a look at our whole list of codes.
Here is the complete list of One for All Universal Remote Codes
3131
0556
0517
1193
3834
3834
1305
3649
Magnavox Universal Remote Codes
This page has all of the codes you’ll need to connect your remote to your television, and it also works with the Magnavox universal remote mc345 (which is not included). It simply takes a few steps to program this gadget, which is both easy to use and quite convenient to have. If you scroll down to the bottom of the table, you will see three distinct setup programs for this device to choose from.
Check out the list of Magnavox Universal Remote Codes
0053
0065
0039
0024
0064
0041
0006
0040
0037
0030
LG Universal Remote Codes
We’ve prepared a list of LG universal remote control codes that may be used with any of the company’s television models.
A universal remote control can be programmed to accept a 3, 4, or 5-digit code using one of the codes listed above. Any television, cable, satellite, or receiver may be controlled by a universal remote that has been correctly configured.
Check out the list mentioned below of LG Universal Remote Codes
0227
0156
0009
0080
0004
0057
0050
0338
0005
0012
Insignia TV Universal Remote Codes
You may use the insignia remote control to operate up to four devices at the same time and access all of their capabilities.
1004
11326
10171
01376
11463
11641
01877
01106
11785
11780
00810
00276
12002
00476
10463
11892
11204
11963
00877
11517
01187
01982
Hisense TV Remote codes
There are universal remote codes for Hisense televisions that are 3, 4, and 5 digits in length; try each one by one until the system begins to function.
Furthermore, by following the straightforward step-by-step instructions, the Hisense Universal Remote Control is simple to set up. It is possible to discover them near the bottom of the code list. Due to the fact that this device does not require any additional settings, you just need to setup it once for the same device.
Please have a look at the Hisense TV Remote codes list
0780
0208
0227
0073
0009
0508
1170
0748
0145
0216
0216
0156
0696
0753
GE Universal Remote Codes
The versions of the CL5, CL4, and CL3 codes are all encoded in the same coding as the GE universal remote control codes. All that is needed is that you input the right code. In order to do this, we develop a table of TV brands and GE codes with the assistance of programming needs that are clearly comprehendible. Follow the instructions given in the following stages for using the GE universal remote control device.
004
020
5107
5032
5405
5153
0001
1911
2891
5213
A complete list of GE Universal Remote Codes
Element Tv Remote Codes
Element Electronics is a well-known brand, in the same way that other well-known brands are. But, today, we’ll find out how the Element TV interacts with the new Universal remote controller. You will require a large number of Element TV remote codes in order to properly configure your system.
If you’re having trouble setting it up with your TV, I’ve included the instructions below that will allow you to configure it with your device, as well as the Element tv codes for the DirectTV remote control.
List of Element Tv Remote Codes
12183
11886
11687
10178
Dish Network Universal Remote Codes
This single universal remote may be used to control a variety of different devices if you are using a DISH network remote.
Today, I’m going to offer you with all of the Dish network universal remote codes you’ll need to configure your dish remote to your television and any other devices you own.
Have a look at the Dish Network Universal Remote Codes list
646
656
505
658
541
Craig TV Remote Codes
The Universal Remote Manage Codes for Craig TV have been offered to assist you in operating your devices if you are using the Craig bookshelf system for music or home theatre and would like to control them all with a single universal remote control. Generally speaking, using the remote control to adjust the level or switch on your system is more convenient.
This list comprises all sorts of codes, including 2 digit, 3 digit, 4 digit, and 5 digit codes, as well as combinations of these codes.
Have you bought a new Universal remote? Are you not sure how to program your universal remote? You are at the right place, in this article you will learn about all the Dynex Universal Remote Codes and methods by which you can use these codes to program Universal remote control. Don’t you know the remote control codes for the Dynex TV?
In the article, we are providing all types of universal remote codes for Dynex TV. Use these Dynex Universal Remote Codes to program your universal remote. These dynex tv codes are of different types like three, four, and five digits.
How to Program the Auto Search Function on a Dynex Universal Remote Control?
In the auto-search method, the remote’s scanning mechanism scans all of the universal remote codes stored in the remote.
It analyses each code one by one to get the right remote code for programming your remote control. Adhere to the following instructions:
Step-1 “Power on” the smart device you desire to operate with the universal remote control, such as a “TV.”
Step-2 To “power on” the remote control, press and hold the device button (DVD, TV, CBL, and OK/SEL) for about three seconds while holding the remote. The gadget’s LED light indicates that it is ready to be programmed.
Step-3 Aim the remote toward the device and push the remote’s “CH+” and “CH-” buttons. The remote control will indicate if the device is on or off. Incessantly press the “up” or “down” keys until the gadget shuts off.
Step-4 Verify the code by hitting the keyboard’s “power” key. The gadget should be operating at this point. If something begins to play, change the station to ensure that the remote is configured properly.
Step-5 From the drop-down menu, pick “device” to save the code. The device’s LED light will flash twice to indicate that the code has been updated correctly.
You may programme the Dynex Universal Remote using the Manual Method
We can program a universal remote control quickly and easily using the keycode, which also acts as an identification for the manufacturer and model of your equipment.
Step-1 The first step is to “Turn On The Device.”
Step-2 From the drop-down menu on your “Dynex universal remote,” select “TV.”
Step-3 Then, hold down the “Setup button” on the Universal Remote until the “Flash Light” appears on the screen (this indicates that the remote is in “Learning mode”).
Step- 4 Finally, enter the “Keycode” that you find throughout the programming tutorial’s reading (Instructions Booklet)
Step-5 Once you’ve finished the previous step, “point your remote control at the television” and “press and hold the power button.”
Step-6 To restart the screen after it has been turned off, press and hold the “Power Button” for a few seconds.
That’s all; your television should now operate flawlessly with the universal remote control; if not, repeat the process using a different Dynex Universal Remote Code from the same area of the reference table.
The Dynex Universal Remote Control: How to Program It Utilizing a Code Search Technique
Even if you were unable to discover the correct key code at the time, you may configure your universal remote to look for the correct code. This code, which is provided in the instructions, causes the remote to enter search mode.
Step-1 To begin, “Start your The Device.”
Step-2 Now hold down the “Setup” button for a few seconds.
Step-3 Push the Channel up button now while continuing to press the “Power Button” on the remote control until the device, in this example your television, “Turns Off.”
While the method detailed above may take a bit longer, locating your key code is critical. After following the instructions indicated above, your remote should be functioning for all in-room features. Using one of the three approaches stated above, we can easily program our Dynex TV Device Universal Remote.
Is Dynex a reputable television brand?
Dynex Produces High-Quality Products at Reasonable Prices. I’ve owned various Dynex devices (a wired router, a television, and so on), and each time I’ve been satisfied with their performance. Additionally, their LCD HDTVs are excellent.
How long will a Dynex television last?
While the displays themselves will survive a decade, the rest of the gear within will not. With careful care and maintenance, a decent brand should last around 5-8 years.
What is the best way to program a universal remote control without a code?
While pressing and keeping the Button and the control for the item to set up, tap and hold the Menu icon. When asked, release both buttons at the same time. When the LED light on your remote control illuminates and remains illuminated, you may remove the item’s button as well as the Power button. To program your remote, point it towards the thing that you wish to program it to work with.
Conclusion
The Universal Remote Codes listed above are advantageous for the Dynex TV and may be located in the list above. If any of the previously listed codes do not work properly on your remote control device, you must proceed to the next code on the list.
Any other Dynex tv remote codes not mentioned in the above list should be put in the comment section below. We appreciate your time in reading!
Vivitar universal remote has three-digit and four-digit universal remote codes and it is eight an one remote control.
If you do not know the code for your device, then look for the vivitar universal remote codes list in this guide so that you can easily program your device with universal remote instructions.
Three methods are mentioned below for vivitar universal remote setup. Try all three methods and finally chose the method to get your remote programmed with your device.
Vivitar Universal Remote Codes List
You’ve come to the right place if you’re looking for a complete list of universal remote codes.
In the table below, we have listed everything along with their brand names. To program your device, try to select the code that best suits your universal remote.
We’ve mentioned the complete vivitar universal remote codes list for Samsung in the following table. There are universal remote codes with brand names that help you to find your required codes that can easily program in the universal remote to work with your device.
0814
0702
0032
0019
0408
0427
0329
1312
1903
1575
Vivitar Universal Remote Codes for Sanyo TV
Here, you can find your vivitar universal remote codes list for Sanyo Tv, we’re here to help you to find your codes. In the below table you may have the complete list of universal remote codes you can search for. Now, look at the table below
1142
0146
0154
0159
0484
0799
0088
0107
0232
0893
Vivitar Universal Remote Code for Dynex TV
0049
…..
Vivitar Universal Remote Codes for Vizio
Vivitar Universal Remote Codes List
113
505
011
1064
1226
502
004
627
Vivitar Universal Remote Codes for Sony TV
Vivitar Universal Remote Codes List
1001
1177
1093
1036
1135
…..
How to Program Vivitar Universal Remote
How to Manually Program the Vivitar Universal Remote
Using the keycode makes your universal remote code programming simple. using the keycode method you can easily identify your device model
Firstly, Turn The Device On.
Next, Press the “TV” button on the “Vivitar universal remote.”
Press and hold down the “Set up key” of the Universal remote until it flashes light. This flashlight indicates learning mode.
Enter the keycode from the instructional booklet.
When done, “point your remote towards the TV” and “press and hold down the power” buttons.
Now release the Power button when the screen switches off.
Now your TV is ready to work perfectly with universal remote control. If your device is not working, then repeat all the steps with different codes from the same instructional booklet.
How to Setup Vivitar Universal Remote With Code Search
First, “Turn the Device On.”
Press and hold down the “Setup” button.
Enter the three-digit code- 9-9-1.
Hold the “Power button” on the remote and now press the Channel up until the device, the TV “Turns off.”
This method is time-consuming but finding your keycode is the foremost thing. After completing the process your remote is ready to perform all the functions.
How do I Program Vivitar Universal Remote Without Codes
Television is the best way for entertainment and there are many other devices like DVD player, Home Theatre, etc which we use in our home. To use that device, you need a universal remote. with the help of a single universal remote, you can handle multiple devices.
Mostly, to operate a universal remote you’re instructed to have a code for programming the remote right? If Yes, then you can also have the complete Vivitar Universal Remote Codes List in the following table along with that, we’re going to learn how to program Vivitar universal remote without codes. So, let’s get to the point.
Programming Vivitar Universal Remote Without Codes
In the following few steps, we’re going to discuss how to program Vivitar universal remote without codes. follow the instructions properly
STEP:1 To begin with, you need to SWITCH ON your device that will work with the universal remote.
STEP:2 After the device now TURN ON your remote, hold on to the component button such as TV, CBL, DVD, and OK\SEL for about 3 seconds, the LED light indicates in the device which means the device is ready to program.
STEP:3 Now, pointing the remote to the device, click on CH+ and CH- key then it shows off signals in the remote. Hold down the UP or DOWN key until the device will turn OFF.
STEP:4 Next, verify the code for this you need to click on the POWER button and the device will turn ON. When the device starts, you have to check whether your remote is programming correctly or not, try to change the channel, and volume ups, down in the remote.
STEP:5 In the end, you need to store the universal remote codes now, click on the DEVICE button, and the code is saved. For confirmation, an LED light will blink twice
Features of The Vivitar Universal Remote Control
This Universal remote control can control up to eight devices. It can work with most major brands of TV, Blu-Ray, DVD, VCR, Cable, Home Theatre, and Satellite….etc. It is a user-friendly design that is Ergonomic. The Batteries of this remote control are Powered by 2AAA batteries. This remote can replace the original remote
How do I Program my Vivitar Universal Remote Manually?
First, turn your device ON then press the TV button on your Vivitar universal remote and the flashlight will appear and enter the code which you find in the Vivitar Universal Remote Codes List . Now, point your remote to the TV and hold down the POWER button and the TV will turn OFF and you’re ready to control your TV with the universal remote.
NOTE: If the code doesn’t work with the universal remote then use another code with the same process as we’ve discussed above try it until you get the correct code.
Can I Program my Vivitar Universal Remote With Code Search?
Yes, you can program the Vivitar universal remote with code search to find the correct one. When you can’t find the correct code, you can use the code search method.
let ‘s start the procedure, TURN ON the device and press and hold on the SETUP key, enter the three-digit code (9-9-1) now, hold down the POWER button in the remote, and then press the channels up until the device TURNS OFF. Now, the remote will work properly.
CONCLUSION
Universal remote always acts as the best remote for all devices. In the above methods, we’ve discussed everything on how to program Vivitar universal remote without codes and the vivitar universal remote codes list also. I hope this helps you and if you find any issues regarding universal remote then comment to us we’ll help you to solve your issues.
For receiving the digital broadcasts with a standard antenna, a digital converter box is required. Many companies manufacture these converter boxes. One of them is RCA that produces digital converter boxes like RCA DTA800.
You will need a remote control once you have connected the converter box to the antenna. With this remote control, you can operate various devices like TV.
If you have your RC digital converter box and are looking for a solution for how to program your remote using Rca Converter Box Remote Codes , we have got you covered here.
The RCA digital converter box remote codes can be used to control your TV or any other devices after programming the RCA converter box with the correct RCA DTA800 Converter Box Remote Codes.
Below is the list of RCA universal remote control code for the converter box
How to Program RCA DTA800 Remote Using Codes for RCA Converter Box?
You have to follow a few quick steps to program your RCA remote control with a TV. Choose the appropriate code from the list of RCA converter box TV codes before that. Once you’ve chosen the code, continue by following the instructions below.
Step – 1. Firstly, remove the battery cover of the RCA remote and insert the new batteries. Now, switch on your television.
Step – 2. Press the “PRM” button on the left corner of the remote. A signal indicator light will turn on.
Step – 3. Now, enter the three-digit remote control code you selected from the RCA converter box codes. You can enter the code by pressing the number keys on the keypad of the RCA remote. After entering the code, press the”OK” button. Now, the indicator light will turn off.
Step – 4. Point the remote control towards your TV and press the volume buttons on it. If the volume changes, this means that your remote has been successfully programmed.
Step – 5. If the code you entered does not work, you can pick another one from the DTA800b1 remote codes list.
If the indicator signal remains lit even after blinking four times, this means that you might have used the incorrect code. You can pick another code from the list and follow the steps mentioned earlier again.
Troubleshooting Tips for RCA Digital Converter Box
1. If the signal is weak or the channel is not available
Firstly, try to reposition the antenna.
In case the signal is still weak, you might require a more powerful antenna to boost receiving of digital TV signals.
We would recommend a smart antenna.
2. TV is not able to receive analog channels
Switch on the digital converter box in pass-through mode. Also, be sure that all the cables are properly connected.
3. Smart antenna is connected newly and requires channel scan
To access the settings, select 5 from the menu. Press 1 to select a channel after that.
4. No sound
You have to make sure that the connections are properly made between the converter box and television.
Also, make sure that the sound of the TV is not muted.
5. On the TV’s screen, there is no picture.
Firstly make sure that the converter box is switched on.
Check that the connections between the converter box and TV are made correctly.
Until the picture appears on TV, use different channels or video inputs.
6. Forgot password
Go to the main menu and choose “Ratings”. Now, input the master password”3308.”
Create a new password. The master password cannot be used to access programs for viewing.
7. The converter box turned off suddenly
Auto Power Down Timer might be activated. Check it in the main menu. It is initially set to four hours.
Closure
A well-known manufacturer of converter boxes is RCA. After you have connected your converter box with the antenna, you have to connect the RCA remote control with your device like a TV.
The list of RCA DTA800 converter box remote codes and the steps to program them are described in the section above. We hope you don’t have any doubts about setting up RCA remote control using RCA digital converter box codes.
Fashion6 years ago