Symphonic TV Universal Remote Codes & Program Instruction 2023

Symphonic TV provides various options for the users of this device, so for they to choose the universal remote controls. If you want to operate your TV with your favorite remote controls, then you can enter the codes and program according to the methods mentioned below. You can look over all the symphonic TV codes for the universal remote in the manual given.

3-Digit Symphonic TV Universal Remote Codes

The given 3-digit universal remote code for symphonic tv work well with the universal remote to get proper control over the Symphonic TV. Try to link one code with the remote and if failed go for another one from the list.

Read More: RCA Universal Remote Codes & Program Instruction

003	053
189	155
198	….

4-Digit Symphonic TV Universal Remote Codes

A remote code is indeed essential to program a universal remote. And one can get these codes down in the list for their smart Symphonic TV operation. Use these 4-digit Symphonic TV Universal Remote Codes to program the Symphonic TV universal remote. If one code does not match, choose the other code for programming.

1105	1280
1031	1036
1484	1384
3021	3002
2321	1024

5-Digit Symphonic TV Universal Remote Codes

Sometimes, 5-digit remotes are required to program your universal remote for a particular device. So, if 3 or 4-digit Symphonic TV Universal Remote Codes does not work, try these 5-digit remote codes for controlling your Symphonic television.

11963	17646
10204	11944
10180	11913
11904	19307
17000	17342`
11595	12270
2810	13811
12248	11394

Philips Universal Remote Codes For Symphonic TV

0247	0906
0004	0520
0324	…..

Symphonic TV Codes for Rca Universal Remotes

The RCA universal remote is well programmed with your Symphonic device when linked with the right code. So, go through the list ( Symphonic TV Universal Remote Codes ) below to get the right code for your Symphonic TV and enjoy the TV features.

1189	1038
1029	1047
1155	1033
1046	1026

Magnavox Universal Remote Codes For Symphonic TV

0087	0088
0085	0043
0086	0044

GE Universal Remote Code for Symphonic TV

0024	0189
0227	0053
0456	…..

With a GE universal remote code, one can easily control the Symphonic television. The GE remote codes support all universal remote controls to work on with their TVs. All you need is to enter the right Symphonic TV Universal Remote Codes for GE, matching the brand type of your TV

Symphonic TV Codes for Dish Remote

733	555
694	682
846	587
646	531
632	123
658	527
841	756
528	541
501	679
629	662
767	764
004	657
617	569
111	845
511	692

Onn Universal Remote Codes for Symphonic TV

189 

Symphonic TV codes for U-verse remotes

1319	1045
1298	1334
1380	1287
1015	1044

Symphonic TV codes for Comcast remotes

11963	10180
10068	10171
12248	11913
12270	11904

Symphonic TV codes for DirecTV remotes

11904	11394
11944	10171
11913	10180
11595	…..

Symphonic TV Setup code – One for All remote

0171	1817
1944	1595
1963	……

Symphonic TV codes for Spectrum remotes

1017	047
0591	456
1251	157
4731	400
0831	168
1330	595
1019	…..

How to Setup a Universal Remote to a Symphonic TV

You can operate any universal remote control by programming with your TV in three different methods. Your TV will work great if you program with working Symphonic TV Universal Remote Codes by using the below methods. Now let us look at the methods you can use if you have the codes from the list.

How to Setuo Symphonic TV Universal Remote Without Codes

When you select the auto search method, all the universal remote codes are gone through the scanning process in the remote. It will scan one code at a time to find the correct remote code that is compatible with your remote to program its control. Follow the instructions given below systematically:

1. Firstly, “turn on” the smart device (TV) that you want the universal remote to operate.
2. Now switch on the remote and click on the device button (TV, DVD, CBL, and, OK/SEL) for three seconds. When the LED light will “turns on” it indicates that the device is ready to program.
3. Keep the remote pointing toward the device and click on the “CH+” and “CH-“switches. When the remote will show an on/off signal, push the “up” or “down” button continuously until the device turns off.
4. Click on the “power” key and verify the code. The device should turn on. If it starts, check the working of the remote by changing the channels.
5. Click on the “device” button and save the code. Led will flash twice to confirm that the code is stored.

How to Setup the Symphonic TV Universal Remote Manual

It is easy to program a universal remote by using the key code. The key code is responsible for the identification of the make and model of your device.

1. Firstly, “Turn the device on.”
2. Click the “TV” on your Symphonic universal remote.
3. To start the learning mode, press and hold the setup button of the universal remote until it shows the “light flash.”
4. Now enter the “Key code” given in the programming guide.
5. After finishing the preceding steps, “point your remote towards the TV” and then “press and hold the power key.”
6. Whenever the screen switches off, you can let go of the “Power key.”

After completing the procedure your TV will work perfectly with a universal remote control, if your device is not working perfectly then repeat the same procedure systematically with different codes.

How to Setup Symphonic TV Universal Remote With Code Search

In case, you are not able to find the key code for the device. At that time, set up your universal remote to search mode to find the correct one. Check the manual for the code, which enables the search mode in the remote.

1. Firstly, “turn the device on”.
2. Now press and hold the “Setup” button.
3. Enter the three-digit code “9-9-1.”
4. Now keep holding the “Power Button” on your remote and then click the channel up button until the device (TV) “Turns off.”

The method mentioned above is time-consuming but it is very important to find your key code. After completing the above procedure your remote is ready to perform all the functions.

I hope that all the methods mentioned above proved helpful to you in programming your symphonic TV and for your favorite remote control.

Program a Symphonic TV to Cable without a Remote

Symphonic is a famous brand in televisions just like other TV models. This device has its individual remote, but it is possible to control this TV without one. A universal remote help people when they misplace the device’s original remote. With a universal remote, you can program the TV to read all the stations receiving through a cable connection. The steps are as follows:

• Connect the RCA cables to the ‘Video Out’ port on the cable receiver. Afterward, put the opposite edges into the ‘Video In’ on the Symphonic TV.
• Switch on the ‘Power’ button on both the Television and the cable receiver.
• Press the ‘Menu’ button on the TV and the system menu displays on the screen. Use the channel buttons for moving up and down and the volume keys to move left and right. Pressing the volume down takes the selection to the left side and pushing the volume up takes the selection to the right.
• Choose ‘TV’ and ‘Programming’. Then, press the ‘Channel Scan’ option. Inform your TV about the cable connection and press ‘Ok’. The Symphonic television scans for every station that you get through the cable connection. The menu closes down after completing the scan. Scroll and search for the stations received by clicking the channel buttons.

Conclusion:

In case any code didn’t work for your device then try some alternative Symphonic TV Universal Remote Codes, mentioned in the manual, and if the issue persists then you can leave a comment below regarding your issue and we will try our best to solve the issue by providing you the best solution as soon as possible